4. Turn the ignition to 3 (OFF) then 2 (LOCK) and remove the second
coded key
from the ignition.
5. Within 20 seconds of removing the second
coded key,
insert the new
unprogrammed key (new key/valet key) into the ignition and turn the
ignition from 3 (OFF) to 4 (ON) (maintain ignition in 4 (ON) for at least
one second). This step will program your new key to a coded key.
6. To program additional new unprogrammed key(s), repeat this
procedure from step 1.
If successful, the new coded key(s) will start the vehicle’s engine and the
theft indicator will illuminate for three seconds and then go out.
If not successful, the new coded key(s) will not start the vehicle’s engine
and the theft indicator will flash on and off and you may repeat steps 1
through 6. If failure repeats, bring your vehicle to your dealership to
have the new spare key(s) programmed.
Locks and Security
113
Summary of Contents for 2002 Ranger
Page 146: ...4 Clip the tether strap to the anchor Seating and Safety Restraints 146...
Page 231: ...2 3L I4 engine 3 0L V6 engine Cleaning 231...
Page 243: ...3 0L V6 engine Maintenance and Specifications 243...
Page 245: ...2 3L I4 engine 3 0L V6 engine Maintenance and Specifications 245...
