Ford Performance M-6007-Z460FFT, Manual

Page: 13 / 24

M-6007-Z460FFT(FRT)
Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS.
Techline 1-800-367-3788 Page 13 of 24 IS-1850-0636
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
TECHNICAL SPECIFICATIONS
Crate Engine Part Number M-6007-Z460FFT(FRT))
Engine Type 351W Based 460 Cubic Inch Small Block
Displacement (cubic inches) 460
Horsepower Rating 575 HP STP cor. @ 5500 rpm
Torque 575 lb* ft STP cor. @ 4700 rpm
Block M-6010-BOSS302 Cast Iron 4 Bolt Main (center 3)
Bore 4.150
Stroke 4.250
Crankshaft Forged Steel (Flywheel bolts require sealer)/ internal balance
Vibration Damper M-6316-D302 Neutral Balance
Connecting Rod Forged Steel H Beam Rod
Piston Forged Aluminum
Camshaft Hydraulic Roller
Cam Timing Position "0" (multi index crank sprocket)
Camshaft Lobe Separation 110°
Camshaft Duration 242°/248° @ .050" lift (int./ex.)
Camshaft Lift .594/.618” (int./ex.)
Cylinder Head M-6049-Z Aluminum
Chamber Volume 63cc
Valve Diameter Int./Ex. 2.020" Int./1.600 Ex.
Compression Ratio 10.1:1
Rocker Arm Aluminum Roller 1.65:1 Ratio
Recommended Timing 30°BTDC Total 4000 rpm (91 octane fuel R+M/2 minimum)
Maximum Rated rpm 6300 rpm
Oil Pan M-6675-FT351/M-6675-DRS351
Oil Filter M-6731-FL1A
Oil Pressure 40 psi @ 240° F/ 4000 rpm
Recommended Oil 10w-30 or 10w-40
Max Oil Temperature 240° F
Recommended Coolant Temperature 195° F
Spark Plugs AGSP-32C
Firing Order 1-3-7-2-6-5-4-8
Fuel Pressure (@ carburetor) 6-7 psi
Recommended Parts Not Included
M-12259-M302 Universal Spark Plug Wire Set
Or
M-12259-M301 Pre-fit black Spark Plug Wire Set
M-6375-D302 Neutral Balance Flywheel (may require M-6397-A302 metric bolt
kit dependent on clutch)
M-4216-A210 Flywheel Bolts (note threads have required sealer pre applied)
M-9439-A50 Intake gasket (included)
*Oil pressure fitting in the left front block is ½ pipe thread, 40 lb*ft. torque max.