M-6007-Z460FFT(FRT)
Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS.
Techline 1-800-367-3788
Page 12 of 24
IS-1850-0636
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
STEP 16: Apply a drop of oil to the threads of the intake manifold bolts, and install intake manifold bolts.
STEP 17: Start all bolts by hand and hand tighten.
Torque intake manifold bolts in two steps (sequence is
shown below):
Step 1: Tighten to 5-10 lb. ft (6-14 Nm)
Step 2: Tighten to 15-18 lb*ft (31-34 Nm)
Note: Repeat step 2 several times until bolt torque is stabilized
Re-torque after 10 engine heat cycles – completely cold to full operating temperature
6
4
2
10
12
5
1
9
11
3
7
8
