background image

F100 GHOST 

User Manual

11

PREFLIGHT CHECKLIST

1.  Fly in an open area and abide by all local and federal guidelines. Check the FAA’s B4UFLY mobile app 

for up-to-date drone flight info. 

2.  Make sure your drone and transmitter batteries are fully charged.
3.  Put the left stick of the transmitter in the middle position.
4.  Follow the Calibration instructions closely. Always turn ON your transmitter first before flying, and 

turn OFF the drone first when you’re finished. 

5.  Make sure the connection is solid between your battery and motor; vibration may cause loosening.  
6.  Make sure the propellers are installed correctly and the motors are working normally after unlocking.

CALIBRATION

TRANSMITTER CALIBRATION

1.  Turn on the transmitter.
2.  Push down the Calibration button and hold for 3 seconds (Fig. 8).
3.  Transmitter will beep 3 times, and drone indicator light will start flashing slower.
4.  Rotate control sticks in any direction for 2 full rotations (Fig. 9). 
5.  Push the Calibration button and hold again for 3 seconds (Fig. 10).
6.  Transmitter will beep 3 times, and drone indicator light will start flashing indicating calibration completion.

FIGURE 8

FIGURE 10

FIGURE 9

Both the drone and transmitter are calibrated when manufactured. However, calibration is 

recommended before every use for optimal flight, and may be required after a crash or if the 

drone is not operating properly.

Summary of Contents for F100 GHOST























Reviews: