8
ASSEMBLY DIAGRAM 5
REMEMBER: Only hand tighten all nuts and bolts until whole F-GHR is assembled
1.
Attach the four END CAP32 (32) to the ends of the bars on the back of the FOOT FRAME (14)
(
Skip this step if
already pre-assembled)
2.
Position the FOOT FRAME (14) on the rear post of the ADJUSTABLE FRAME (11) so the flat surface is facing
towards the front. Attach using two CARRIAGE BOLT M10X65 (35), two WASHER10 (44) and two AIRCRAFT
NUT M10 (46)
3.
Attach the two HANDLE GRIPS (28) to the ends of the handles on the PAD SUPPORT FRAME (13) Attach the
two END CAP 25X70 (30) to the ends of the crossbar on the PAD SUPPORT FRAME (13)
(
Skip this step if
already pre-assembled)
4.
Position the PAD SUPPORT FRAME (13) on the top of the FRONT SUPPORT (4) so the handles angle towards
the front. Attach using four HEX BOLT M10X16 (38) and four WASHER10 (44)
Summary of Contents for F-GHR
Page 11: ...11 EXPLODED DIAGRAM...
Page 12: ...12...