42
ASSEMBLY STEP 5 INSTRUCTION DRAWING
1.
Assemble the birds sliding sleeve right(32) into the stainless steel guide rod right(33).
2.
Assemble the birds sliding sleeve left(34) into the stainless steel guide rod left(31).
3.
Use M12*25 hexagon bolts (38),
φ
12 flat washer (37),
φ
12 spring gasket (36) as shown in the
picture stainless steel guide rod right(33) is mounted on the main body. The left and right
assembly mode is the same.
4.
Use M10*75 hexagon bolts (30),
φ
10 flat washer (8), M10 lock nut (9) to install the stainless steel
guide rod right (33) is assembled on the decorative board on the main body, and the left and
right assembly methods are the same.
5.
As shown in the picture, use M10*80 hexagon bolts (29),
φ
10 flat washer (8), M10 lock nut (9) to
install across connected plate (35) is assembled on the main body.