47
ASSEMBLY STEP 7 INSTRUCTION DRAWING
1.
Disassemble the ball ends of the safety hook left (44) of the wire rope according to the
requirements in the picture, and pass through and combine in ABCDEFGH order according to
the picture lnstall 92 pulley (42) with powder sleeve (41), M10×75 hexagon bolt(30), M10 lock
nut (9) fixed 92 pulley (42).
2.
Reassemble the ball end of the wire rope-nose nose (44) as shown in the figure.
3.
Assemble the nose end of the wire rope-nose nose (44) on the main sliding sleeve with M10
×25 hexagon bolt (43) and
φ
10 flat washer(8), M10 lock nut (9) to secure it.
4.
The left and right installation modes are the same.
