Installation Guide
SPARC/CPU-5TE
Page 10
FORCE COMPUTERS
1.4.4
RESET and ABORT Key Enable
To enable the RESET and the ABORT functions on the front panel, set switches SW6-1
(RESET) and SW6-2 (ABORT) to ON. This is the default setting.
1.4.5
Front Panel SCSI#1 Termination
Please note how the SCSI#1 termination works on the front panel. Termination for the SCSI#1
interface is disabled when SW7-1 is ON. When switch SW7-1 is OFF, the termination is set
to automatic termination mode. Automatic termination mode means the respective termination
is disabled when you connect a standard SCSI cable to the connector.
1.4.6
P2 SCSI Termination
Termination for the P2 SCSI#1 is disabled when SW5-4 is ON, and this is the default setting.
Termination for the P2 SCSI#2 is enabled when SW5-3 is OFF, and this is the default setting.
FIGURE 3.
SCSI Termination
MACIO
SCSI#1
F
R
O
N
T
P
A
N
E
L
MACIO
SCSI#2
#1
#2
SCSI#1
V
M
E
B
u
s
P
2
C
o
n
n
e
c
t
o
r
Termination
SW7-1 controls SCSI#1 termination for Front Panel
OFF = Automatic
ON = Disabled
SW5-3 controls SCSI#2 termination on P2
OFF = Enable
ON = Disabled
OFF = Enable
ON = Disabled
SW5-4 controls SCSI#1
termination on P2
Termination
Termination
