Installation Guide
SPARC/CPU-5TE
Page 8
FORCE COMPUTERS
1.3.2
Memory Module MEM-5
It is necessary to install the memory module on the board before powering up. For instructions
on installing the MEM-5, please see the document How to Install MEM-5.
Memory Module # 1 must be installed for power up because it holds configuration
information for booting the board. Memory module # 2 is optional for increasing memory
capacity. For the location of the memory module connectors on the board, please see
“Diagram of the CPU-5TE (Top View)” on page 2.
