Using the Forbes Designa
Using the water purifier for the first time
1. Connect the power plug, press the on/off switch (4) and the red led will be
lit for 10 sec (approx) and the the green led comes on.
2. Open the divertor valve for water supply. Water now flows to the purifier.
3. In order to flush the Dual Filter Cartridge, press switches (3) and (5)
simultaneously. Release the press switch after one minute of flushing.
4. After this period press switch (5) to further flush the purifier during
(five) minutes. Press switch (5) to stop the water flow. Forbes Designa is
now ready to give you microbiologically safe water.
5. Shut off the purifier by pressing switch (4).
Normal use of Forbes Designa
1. Open the divertor valve.
2. Press switch (4) and the red led will be lit for 10 sec (approx).
3. When the green led is lit, press down switch (5). Switch (5) should be
pressed to both obtain water and also to stop the water.
4. Close the water tap, if not in use.
5. Shut off the purifier, by pressing switch (4).
If the product hasn't been used for a long period, flush the unit for approx.
5 minutes before drawing any water for drinking, cooking, etc.
N.B. Do not run hot water through Forbes Designa.
1
2
3
4
5
6
alarm
ready
flush
on/off
water
