Wall mounted installation
If the water purifier is to be wall mounted, proceed as follows:
1. Wall mount the purifier within 1 metre from tap.
2. Drill three holes 43-45 mm deep in the wall according to the positions
of holes in the wall bracket. Use a drill of Ø 6 mm (see fig 1).
3. Insert the rawl plugs in the holes, fix the wall bracket on the wall with
the screws.
4. Push the release button and remove the top cover at the same time
(see fig 2).
5. Mount the appliance on the wall bracket (see fig 3). Inserting the
bottom of the unit first.
6. Lift the lever and insert the hook in the slot of the unit. Ensure that the
hook is locked and then release the lever.
7. Check that the unit is properly placed on the bracket and mount the
top cover (see fig 4).
Fig 1
Fig 2
Fig 3
Fig 4
5
Installation
