ForaCare D20 No-Coding Owner'S Manual Download Page 44 | Manualshive

Page: 44 / 58

background image

44

Important Control Solution Information

• Use only FORA control solutions with your monitor.
• Do not use the control solution beyond the expiration date or 3

  months after ﬁrst opening. Write the opening date on the control
  solution vial and discard the remaining solution after 3 months.
• It is recommended that the control solution test should be done at
  room temperature (68°F to 77°F / 20°C to 25°C). Make sure your
    control solution, monitor, and test strips are at this speciﬁed
    temperature range before testing.
• Shake the vial before use, discard the ﬁrst drop of control solution,
  and wipe off the dispenser tip to ensure a pure sample and an
  accurate result.
• Store the control solution tightly closed at temperatures between
  35.6°F and 86°F (2°C and 30°C). Do NOT freeze.

For further information, please refer to the test strip package insert.

«
...
42
43
44
45
46
...
»

Summary of Contents for D20 No-Coding



























































Reviews:

No comments

Related manuals for D20 No-Coding

Brand: OK Biotech Pages: 2

Brand: HemoCue Pages: 104

Brand: Winnoz Pages: 3

bewell connect MyGluco Dongle BW-DGM1

Brand: VISIOMED Pages: 69

Brand: Keto-Mojo Pages: 2

Brand: ADM Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands