manualshive.com logo in svg

ForaCare D20 No-Coding, Owner'S Manual

Share
Download
ForaCare D20 No-Coding Owner'S Manual Download Page 40

40

Caring for Your Monitor

To avoid the meter and test strips attracting dirt, dust or other 
contaminants, please wash and dry your hands thoroughly before use.

Why the cleaning and disinfection should be performed?

Cleaning and disinfection are different. Cleaning is the process of 
removing dirt (e.g. food debris, grease, dust), disinfection is the 
process of killing germs (e.g. bacteria and viruses).

When to clean and disinfect the meter?

Clean the meter when you see any dirt on it. You should disinfect the 
meter at least once a week to prevent infection.

How to clean and disinfect the meter?

The meter must be cleaned prior to the disinfection. Use one 
disinfecting wipe to clean exposed surfaces of the meter thoroughly 
and remove any visible dirt or blood or any other body fluid with the 
wipe. Use a second wipe to disinfect the meter. 

Do NOT use organic 

solvents to clean the meter.

We recommend for meter cleaning and disinfection you should use the 
disinfecting wipe/towelette from below. 

► 

Micro-Kill+™ (Micro-Kill Plus™) by Medline

     (EPA Reg. No. 59894-10-37549)

To obtain disinfecting wipes and other information, please contact 
Medline at 1-800-MEDLINE (1-800-633-5463) or visit
www.medline.com.

Summary of Contents for D20 No-Coding



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands