7
QUICK INSTALLATION STEPS
Data Transmission through Ethernet
(FORA GW9014A TeleHealth Gateway contains a build-in DHCP Client
Service)
1. Prepare your internet router (GW9014A contains build-in DHCP Client
Service), and make sure that it can work properly. For the settings of
internet router, please refer to your service carrier's owner manual.
2. Open FORA GW9014 Gateway kit and take out the contents.
3. Plug power adapter into a power outlet and power adapter port on the
gateway.
4. Connect RS232 interface cable with any RS232 available device to
RS232 port on the gateway.
5. Securely insert ethernet cable to internet router and network cable
port on the gateway as illustration below.
Internet Broadband Router
► GW9014A
6. Turn on gateway power. (“O” presents as turn off, “―” presents as
turn on)
7. Congratulations! You have completed all the installation. Please
check if the PWR LED indicators are lit as the illustration below.
