XQ-48DSPSpecial DSP amplifier
19
3. Software Operation
User Manual
Lock output Configure button:
Click this button to configure the channels CH1 to CH8 to lock or unlock operation,
it indicates that the configuration channel is locked, click this button again to unlock
the display when the button is green. In the unlocked state, click CH1~ CH8 can be
configured to output the positioning of the sound field; in the locked state, if the
output channel sound field is empty, you can not click to enter the editing interface,
only the output channel sound field is not empty, click on the channel to enter edit
mode, but the channel is not possible to select the sound field.
Link output Configure button:
Click this button, a pop-up dialog box, select the synchronous mode (option to
"copy from left to right" or "Copy from right to left" radio button), press "OK" to
confirm; when you click this button again FBI releasing left and right channels
function. (Note: the left or right channel by the FBI, the software will automatically
lock output channels, output of the equalizer, divider and output volume data may
FBI mute, phase, space and delay are not the FBI. .) in the locked FBI, the item
associated tone has an FBI logo be displayed.
Mixer settings:
click "mixer" in the "7" area in Figure 3.2.2, then you can switch to (Figure
3.3.14) the relevant parameter settings for the corresponding adjustment.
figure 3.3.14
Summary of Contents for XQ-48DSP
Page 31: ......
