XQ-48DSPSpecial DSP amplifier
16
3. Software Operation
User Manual
3.3.4 Output signal equalizer and crossover operation
Output channel equalizer and crossover editor mainly in the following areas of
regulation, as shown in 3.3.7:
Figure 3.3.7
Gain, drag around to adjust the equalizer frequency points; when the mouse is
moved to the left and right of the small red box, press and drag left and right to
adjust the equalizer Q. All parameters are displayed simultaneously adjust the
current real-time equalizer is also updated value EQ parameters editing area.
1. the output channel EQ editing method, all 31 equalizer will work for the next
parametric equalizer. When the parametric equalizer curve, if available in the box
below the corresponding input parameter values can be (frequency, Q value, and
gain) adjusted in real time will also be revealed at the top (as shown in Figure
3.3.8 parametric equalizer case ).
Figure 3.3.8
Straight balanced:
the button shown in Figure 3.3.4, the current channel as long
as there is an equalizer in the open state, this button will appear highlighted in
green state, indicating that you can click this button to make all the equalizer
Summary of Contents for XQ-48DSP
Page 31: ......
