for Living 059-7303-0, Assembly Instructions Manual

Page: 4 / 21

6 7
Product No. 059-7303-0
•
Model No. JS-C140-4A
B
at
te
ry A
ss
em
bly
Changing Batteries
1. Pull out the light globe from the wind spinner and ensure the switch is in the off position.
2. To open the glass part of the light globe, use a Phillips screwdriver to remove the 2 screws in the
metal cover.
3. Remove the metal cover; then unscrew 2 screws on the plastic enclosure.
4. Remove depleted battery. Clean the contacts on the new battery and in the product before installing battery.
5. Always purchase the correct size and grade of battery.
Insert the new battery correctly with regard to polarity (+ and -).
6. Failure to insert batteries in the correct polarity, as indicated in the battery compartment,
may shorten the life of the batteries and may leak.
7. Do not mix old and new batteries.
8. Remove batteries when not using product for extended period of time.
Remove used batteries promptly.
9. Reassemble by inserting the two screws back into the plastic enclosure and tighten gently, then re-insert
the other two screws back into the metal cover and tighten gently.
Do not over-tighten as this may break the glass.
Rechargeable battery:
This product contains one rechargeable battery. When battery expires, it must be recycled or disposed of properly.
Please contact your local waste disposal authority for correct procedure. Do not incinerate the battery or put it into
fire.
1 x 1.2V AAA Ni-MH Rechargeable Battery (incl.)
Always ensure that the solar light is only used with the specified rated rechargeable battery.
C
le
an
in
g
an
d
M
ai
n
te
n
an
ce
Dimensions (L x W x H) 37 x 17 x 183 cm
15 x 6 3/4 x 72"
Product weight 1.85 kg
4 lb 1 oz
Troubleshooting
Solar light does not light-up in dark places:
a. Check the position of the switch and make sure it is not at the “off” position.
b. Check the rechargeable battery and make sure that it is well connected to the metal plate.
Check the location of the solar light; keep it away from night light sources, such as exterior lights.
Lighting hours are short:
Check the location of the solar light, make sure it is in a sunny area, so the batteries can be fully charged during day
time.
Te
ch
n
ic
al
D
at
a
Tr
ou
b
le
sho
o
tin
g
Wa
rr
an
ty
FUNCTION:
• During day time, the solar panel converts solar power into electricity and recharges
the battery; at night, powered by the electricity stored inside the battery, the solar light
turns on automatically.
• The lighting hours of the solar light depends on the geographical location and weather
condition.
LOCATION:
• It is important to select an outdoor location with full, direct sunshine where the solar
panel can receive at least 8 hours of sunlight each day. Shady areas will not enable
batteries to be fully charged, which will reduce the lighting hours at night.
• It is also important to select an outdoor location not near night light sources, such as
street lights, which may cause the solar light to turn off automatically.
• The solar light is designated for outdoor usage, it is ideal for night lighting of garden,
lawn, etc.
CLEANING:
• When the solar panel is covered with dust, please clean it by using a soft moistened
cloth (do not use any chemical or abrasive cleaner).
• It is important to ensure that no moisture enters into the solar light.
This For Living
™
product has three (3) months Warranty. This warranty is limited to the replacement of defective
parts only. Labour charges and/or damage incurred during installation, repair, replacement as well as incidental and
consequential damages connected with the above are excluded. Any damage to this product as a result of neglect,
misuse, accident, improper installation or use other than the purpose SHALL VOID THIS WARRANTY.
Figure 2
ON/OFF