16
Item
Default
Setting
Description
Adjust
0
-16 to 16
Sets the offset from the source timecode.
For example, if set to
+16
, “
0:0:0.16
” is output when
the timecode count reaches
0:0:0.0
.
Reset
-
-
Reset the Time Code Generator count to 0:0:0:0.
Preset
-
(Start time)
Sets the timecode preset value. Enter the preset
time and press
Preset
to start timecode from the
preset time.
Drop
Frame
Off
Off
On
To use drop frame, set to
On
.
*
Set the external LTC Terminal to
Input
and input LTC signal in the LTC I/O terminal.
4-1-5. Output Select
Selecting
Output Select
in the Video Block diagram opens the following menu screen.
Item
Default
Setting
Description
SDI
Operate
Bypass
Operate
Bypass
: Video signals input in SDI IN are output
from SDI OUT without processing.
4-1-6. Video Status
Selecting
Video Status
in the Video Block diagram opens the following screen, showing video
input status in the left side and output status in the right side.
Pressing the
Detail
button shows the screen as shown below.
The screen shows payload ID codes and error count of the input signal.
To reset the error count, press
Error Count Reset
in the bottom right corner of the screen.
