13
5-4. Composite to SD (without Genlock)
This operation example shows how to convert Composite video to SD-SDI video without using a
genlock signal. The aspect ratio of the converted video is 4:3 as well.
Connection
1) Connect the OSD OUT port to NTSC (PAL) monitor.
2) Input a comosite signal to the COMPOSITE port.
3) Connect the [OUTPUT-3G/HD/SD 1] port or [OUTPUT-3G/HD/SD 2] port to a waveform
monitor or an SDI monitor.
4) Power on the UFM frame.
Conversion Setting
1) Press the MENU OSD button to display the menu on the NTSC (PAL) monitor.
2) Make settings as shown in the table below. See section 4-2. "Menu Operation" for details on
menu operation.
Menu
Item
Setting
Description
Input
Source
Composite
Selects
Composite
for input port.
Output
Output
SD
Selects
SD
for output video format.
Genlock
Free run
Sets reference mode to
Free
run
.
Scaling
(*1)
SD in format
Normal 4:3
Sets
Normal 4:3
for input aspect ratio.
SD out format
Normal 4:3
Sets
Normal 4:3
for output aspect ratio.
(*1) See section 6-3. "SD to SD conversion - 4:3 Output",
section 6-4. "SD to SD conversion - 16:9 Anamorphic Output" and
section 6-5. "SD to SD conversion - 16:9 Letter Box Output"
for details about scaling between SD images.
UFM-30UDC
OUTPUT
INPUT
COMPOSITE
3G/HD/SD-SDI
3G/HD/SD-SDI 1
3G/HD/SD-SDI 2 SDI MONITOR
OSD OUT
Input (Composite
）
Out 2 (SD-SDI)
Out 1 (SD-SDI)
Menu display
and
Output video
Preview Out (SD-SDI)
4:3
4:3
