Foppapedretti TreSystem, Instruction Manual

Page: 9 / 28

Recline the backrest (fig.20)
A. To catch hold of the belt with one hand, and push up the Adjusting Holder as shown in
picture.
B. Press the button situated on the center of the Holder with your thumb and pull the holder.
Note: (fig.21a, fig. 21b)
To reduce the movement of the seat, when using the stroller on irregular grounds, fix the
seat to the frame, on both sides, using the Velcro straps.
Warning:
This vehicle has been designed for children of above 6 month age!
If you wish to use one of the accessories with which you can equip with your chasis
car seat of the Group 0+ or carry cot developed for when your baby is small, pls. Operate
it by following these instruction.
Carry cot
Montage (fig.22, fig. 23)
Align the carry cot with the adaptors at both side, and press until “click” sound.
Remove (fig.24)
lift up the buttons of the adaptors with one finger at each side and lift up the seat to
remove the carry cot.
Adjust canopy (fig.25)
Press the buttons at both side to adjust he handlebar of carry cot.
Adjust the backrest (fig.26)
Lift up the adjusting Holder to adjust the backrest up, press the button situated on the
upper part of the Holder and push the Holder down to adjust the backrest down.
Warning
Do not add a mattress thicker than 15 mm.
Car Seat
Montage (fig.27)
Align the carry cot with the adaptors at both side, and press until “click” sound.
Remove (fig.28)
Lift up the buttons of the adaptors with one finger at each side and lift up the seat to
remove the car seat.
Adjust handlebar (fig.29)
press the buttons at both side to adjust the handlebar of the car seat.