• ENGLISH •
• ENGLISH •
46
4.8 Removing and installing the harness
Unhook the chest belt straps from the belt tensioning bracket on the back of the car
seat (fig.28)
Place the belt tensioning bracket with adjustment strap in the fabric lining (fig.29)
Unhook the chest protector straps from the hook (fig.30)
Pull the chest protector straps and the chest belts through the slots (fig.31).
Unclip the buckle (fig.32).
Wrap up the shoulder straps and place them back in the lining housing (fig. 33).
To remove the crotch strap, locate the locking ring on the lower side and rotate it to
pass through the slot, while from the seat side pull up the crotch strap (fig.34).
Putting the harness back on:
Follow the disassembly steps in the reverse order. Make
sure that the crotch strap ring is properly locked, when pulling the crotch belt from the
seat side, it should not slip out. Make sure that the chest belts are correctly attached
to the belt tensioning bracket (fig. 28). When putting the completed harness back on,
make sure that the belts are not twisted.
3 5
3 6
3 7
3 8
3 9
4 0
2 8
2 9
3 0
3 3
3 2
3 1
3 4
3 5
3 6
3 7
3 8
3 9
4 0
2 8
2 9
3 0
3 3
3 2
3 1
3 4
ASSEMBLY AND OPERATION
