FoodShare Bicycle Blender, Step By Step Building Manual

Page: 7 / 12

Trace the middle section of the
chassis centred on the middle
plywood piece and cut it out.
Insert the middle section of the
chassis into the hole you just
cut and then reassemble the
chassis around the plywood.
Attach the plywood sides to the
plywood top with 1
½ ” screws.
Place the middle plywood with
the chassis in position and then
attach the plywood bottom to
the sides with 1
½ ” screws.
REASSEMBLE CHASSIS TRACE CHASSIS MIDDLE
PUT CHASSIS IN POSITION ATTACH BOTTOM
Take the bottom piece and cut
out a 1-5/16” x 2-3/8” rectangle,
centred on a 6” x 6” section of
the plywood. Insert the bottom
piece of the chassis in this hole
to make sure that it fits.
MARK RECTANGLE
FIT CHASSIS BOTTOM
OPTIONAL: Take the top piece
of polycarbonate (6” x 6”), trace
a hole the same size as the one
you just cut in the plywood, and
cut it out using the same
method you used to cut the
hole in the plywood.
TRACE CIRCLE ON POLY CUT OUT CIRCLE
STEP 2
STEP 3
STEP 4
STEP 5
WWW.FOODSHARE.NET THE BICYCLE BLENDER 7 OF12