FoodShare Bicycle Blender Step By Step Building Manual Download Page 2

FoodShare Toronto

FoodShare Toronto is a non-pro

fi

t community organization whose vision is Good Healthy Food for 

All.

 

Founded  in  1985  to  address  hunger  in  Toronto  communities,  FoodShare  takes  a  unique 

multifaceted and long-term approach to hunger and food issues. 

We work to empower individuals,  families and  communities  through  food-based  initiatives,  while 
advocating for the broader public policies needed to ensure  that everyone has

 

adequate access to 

sustainably produced, good healthy food.

Working "from 

fi

eld to table," we focus on the entire system  that puts food on our tables: from the 

growing, processing and distribution of food to its purchasing, cooking and consumption.

FoodShare  would  like  to  acknowledge  the  support  of  the  Ontario Trillium  Foundation,  Patagonia 
and Whole Foods Market in the production of this toolkit.

Published By:

FoodShare Toronto

90 Croatia Street
Toronto, ON
Canada
M6H 1K9
Phone: (416) 363-6441
Website: www.foodshare.net

 WWW.FOODSHARE.NET

THE BICYCLE BLENDER

2 OF 12

Here’s to enjoying 
the fruits of your labour 
from the fruits of your labour

Summary of Contents for Bicycle Blender













Reviews: