background image

1. The product can be cleaned with warm water, a mild soap and a clean soft cloth.
2. Clean progressively and gently.
3. It is not required to use any abrasive cleaning pads, wire wool or cloths to clean the 

product.
4. Avoid a vigorous cleaning action, as this could contribute to denaturing and dulling
5.Abrasive or strong cleaning products containing ammonia, bleaches, alcohol, dyes, 

acids (hydrochloric, formic, phosphorus, chlorine or acetic) will be not be affected.
6. If using a spray cleaner, apply the cleaning agent onto a soft cloth, never directly spray 

onto the product as the cleaner may enter gaps and openings and cause damage. Do 

not allow the cleaner to remain on the product for a period of time. After cleaning, rinse 

thoroughly with clean water.

Acid

  General Information 

  Care & Cleaning 

FontanaShowers

©

FontanaShowers

©

FontanaShowers

FontanaShowers

Customer Service: 800-684-4489

fontanashowers.com

All products manufactured and supplied by Fontana are safe and comply to legislative 

requirements. Providing they are installed correctly and receive regular maintenance in 

accordance with these instructions your user experience will not be affected.

7

Summary of Contents for BRAVAT FS1071








Reviews: