2
3520 Industrial Way • Jasper, AL 35501 • www.fifthwheel.com • 800-874-9780 • Email: [email protected]
FIGURE 2
Tube Support Placement
Tube Support Placement
Wheel Cap
Tube Supports
FIGURE 3
Grease
Groove
Tube
Supports
FIGURE 4
Tube and Tube Supports
Tube and Tube Supports
Tube
Tube Supports
FIGURE 5
2-5/8”
2-5/8”
2. Place tube supports into top plate as shown in Figures 2 and 3.
3. Now place tube into tube supports as shown in Figures 4 and 5. Make sure tube is parallel to rear cross
member. The tube supports should be flush with the wheel caps and the bottom chamfer should rest just over
the grease groove as shown in Figures 2 and 3. Tube supports may need to be trimmed for proper fit. The tube
should measure 2-5/8" from rear cross member to front side of tube on both sides as shown in Figure 5.
