13
first, and when the "-" is pressed first, the digital value of the current is displayed first
The value of cumulative power generation. When viewing the values of current and cumulative power
generation, you can scroll through the screen by continuing to press the "+" or "-" key. After the
current display is completed, continue to press the "+" key to start displaying the cumulative power
generation. The figure above shows the current display interface. “CH1:” in the figure indicates that
the current value monitored by channel 1 in real time is “6.929A”, and so on.
The figure below shows the cumulative power generation display interface. "CH1:" in the figure
indicates that the cumulative power generation of channel 1 is "6.929kwh", and so on.
Parameter settings
Press the "SET" key to enter the Modbus parameter setting interface. The
Modbus parameter setting is as shown in the figure below:
•
ADDR: The communication address of the Modbus slave node, the range is 1 ~ 247 (default
is 247).
•
PAR: The data verification method of Modbus communication. The optional parity (None),
odd parity (Odd), even parity (Even), and no parity by default.
•
BPS: Baud rate for Modbus communication. The selectable baud rates are 2400, 4800, 9600
(default), 19200, 38400.
Press the "+" key to select down to the second page of the setting
interface
