www.fonicainternational.com
www.fonicainternational.com
FLAG
ISODYNAMIC SPEAKERS
11
10
FLAG
ISODYNAMIC SPEAKERS
Place the packaging containing the isodynamic panel on a flat, clean and wide enough
surface to be able to hold it up safely (as long as the package, at least twice wider than the
package).
Open the box place the cardboard sheet covering the speaker next to it, so that it can act as a
support surface for the speaker once removed from the package.
STEP 1
STEP 2
CAUTION!
You MUST NOT touch nor get
close with ANY object, especially
ferromagnetic objects that could
be attracted by the powerful
magnets underlying the surface,
to the central area (indicated
by the continuous lines in the
illustration), both from the front
and the back. Instead, handle the
speaker from the peripheral area
(up to 2.5cm from the lateral
edge and from the upper one,
and from about 30cm from the
bottom); be careful not to pull
the profiles.
Pull out the planar speaker, holding it by the
side corners of the profiles, one person for
each short side, without touching the fabric.
STEP 3
