PREFACE
Thanks for buying Digital Public Address and Voice Alarm System. In the following sections the Digital Public
Address and Voice Alarm System is referred to as the “system”. Please carefully read this manual prior to
product use so as to ensure correct use of the system.
BRIEF INTRODUCTION
This manual mainly describes the main hardware products of the system. The following chapters are inclu-
ded:
- Chapter 1:
ZS-2000M Operations Guide
This chapter describes the basic operations and relevant precautions of the ZS-2000M.
- Chapter 2:
ZS-1500/ZS-2250/ZS-4125 Operations Guide
This chapter describes the basic operations and relevant precautions of the ZS-1500/ZS-2250/ZS4125.
- Chapter 3:
ZS-200M Operations Guide
This chapter describes the basic operations and troubleshooting of the ZS-200M.
- Chapter 4
:
ZS-4328IO Operations Guide
This chapter describes the basic operations and relevant precautions of the ZS-4328IO.
INTENDED READER
This manual is mainly for personnel who are to use the system.
RELEVANT DOCUMENTS
The following documents can be used as a reference when reading this manual:
- Digital Public Address and Voice Alarm System Product Description.
- Digital Public Address and Voice Alarm System Installation Manual.
- Digital Public Address and Voice Alarm System Configuration Manual.
USE INSTRUCTIONS
- All content including figures in this manual are to be used only for reference.
- The product may be subject to change from time to time without notice.
- It is strongly recommended that users read all warnings and precautions in this manual carefully.
- Carefully read this manual before using the product and keep it as a reference for future use.
- This manual has been reviewed with its accuracy is ensured. In case of any doubt or dispute of the product
description, the final interpretation given by the FONESTAR SISTEMAS, S.A. shall prevail.
- The FONESTAR SISTEMAS, S.A. is not liable for any consequences caused by user mistakes when using
the product or user misunderstandings of the manual content.
ZS-2000M OPERATIONS GUIDE
The ZS-2000Mis a broadcasting control device that expands broadcasting zones and supports multiple
sound sources. The ZS-2000M integrates with functions such as the sound source file storage system,
network audio broadcasting system, the loudspeaker zone control system, and the system for monitoring and
diagnosing faults. The ZS-2000M integrates well and is easily configured. Mainly describes the basic
operations and precautions of the ZS-2000M system.
POWERING THE ZS-2000M ON/OFF
The system powers on when the power switch is in the “I” position, and powers off when the switch is in the
“O” position.
When the indicator light for the main or standby power supply on the front panel of the ZS-2000M turns
green, the respective power supply is working normally.
When the power supply indicator light turns orange, the respective power supply has experienced a fault.
Check whether the power supply is connected correctly and that the ZS-2000M power switch is turned on.
- 2 -
EN
ZS-2000M_MANUAL_(Operation)_(EN_ES)_A5c_20210701-2021.qxp_Maquetación 1 2/3/22 15:17 Página 2
