FONESTAR PAR-220L, Instruction Manual

Page: 2 / 20

EN
- 2 -
DESCRIPCIÓN
LED flat PAR RGBW spotlight.
Operation in automatic, manual (colour and strobe adjustment), sound activation, DMX control, master/slave
mode.
CONTROLS AND FUNCTIONS
REAR PANEL
1.- SCREEN : shows the current mode of operation of the device.
2.- MENU : allows you to change the mode of operation.
3.- UP/DOWN : increases/decreases the value of the selected mode. To confirm the selection, press
ENTER.
4.- ENTER: confirms the current value of the configured parameter.
5.- POWER IN: 100-240 V AC power supply.
6.- DMX OUT : control signal output, 3 pin XLR connector.
7.- DMX IN : control signal input, 3 pin XLR connector.
CONNECTION AND OPERATION
Select the operation mode by pressing the MODE buttons. To make changes within a mode use the SET
buttons and press ENTER to confirm.
The following table shows you all the operating modes and the possible settings for each mode.
MODE VALUE FUNCTION
DMX
CONTROL
A - - - 001-512 8 channel DMX control. Value: DMX address
d - - - 001-512 4 channel DMX control. Value: DMX address
MANUAL
r - - - 000-255
Create color by mixing intensities of red (r - - -), green (G - - -), blue (b- - -) and
white (u - - -).
Value: color intensity (000: minimum, 255: maximum)
G - - - 000-255
b - - - 000-255
u - - - 000-255
FH - - 01-99 White strobe light. Value: speed (01: slow, 99: very fast)
CL - - 00-08 Preset fixed colours. Value: colour
AUTO
CC - - 01-99 Effect 1. Value: speed (01: slow, 99: very fast)
dE - - 01-99 Effect 2. Value: speed (01: slow, 99: very fast)
CP - - 01-99 Effect 3. Value: speed (01: slow, 99: very fast)
SOUND SU - - 00-08 Sound activated. Value: led time ON (01: short, ~3 sec)
PAR-220L_MANUAL_(EN_ES_FR_PT)_20200131.qxp_Maquetación 1 31/1/20 11:18 Página 2