FONESTAR PAR-220L, Instruction Manual

Page: 3 / 20

DMX CONTROL
To control the device using a DMX controller:
- Select the desired DMX operation mode: 8 or 4 channels as shown in the table above. Use the MODE and
SET button to select the number of channels and press ENTER to confirm the setting.
- Select the DMX address to control this LED bar with a value between 1 and 512. Use the MODE and SET
button to select the DMX address and press ENTER to confirm the setting.
- Below are the features of each channel in the different DMX operating modes:
4 channels (d):
8 channels (A):
- It is possible to cascade several devices to be managed together (if they are in the same DMX address) or
separately (if they are in different DMX addresses).
Use an XLR cable to connect the device's DMX IN to the DMX OUT of the DMX controller when the device
is the first element in the chain. Alternatively, connect to the DMX OUT of the preceding element in the
lighting chain of your installation.
You can also supply power from one light to the next in the chain in the same way as shown in the picture.
CHANNEL VALUE FUNCTION
CH1 000-255 Red intensity
CH2 000-255 Green intensity
CH3 000-255 Blue intensity
CH4 000-255 White intensity
CHANNEL VALUE FUNCTION
CH1 000-255 Overall light intensity
CH2 000-255 Red intensity
CH3 000-255 Green intensity
CH4 000-255 Blue intensity
CH5 000-255 White intensity
CH6 000-255 RGB strobe speed
CH7
000-050 No effect
096-107 Effect 1
108-119 Effect 2
120-132 Effect 3
133-143 Effect 4
251-255 Sound activated
CH8 000-255 Speed, from slow to fast
- 3 -
EN
PAR-220L_MANUAL_(EN_ES_FR_PT)_20200131.qxp_Maquetación 1 31/1/20 11:18 Página 3