FONESTAR MA-125RGUB Instruction Manual Download Page 5

Page: 5 / 12

5.-

MP3/FM

: pressing this button alternates between the two available audio sources (USB/SD/MP3 player

or radio).

6.-

USB

: connection port for USB storage devices.

7.-

SD/MMC

: SD card reader.

8.-

REC (Memory)

: button for recording from the AUX, INPUT 1-4 inputs and the bluetooth module. Follow

the steps below to make the recording:
- Connect a USB device or an SD card and press the REC button to start recording.
- REC will appear on the display.
- Press the SD/USB button to select the where the recording is going to be stored:

the SD memory card or USB storgae device.

- Select the desired recordiing level with the REC LEVEL control.
- Press the REC again. Once REC ﬂashes 3-4 times on the display,

recording will start.

- Press the

button to stop recording.

Note

: the recording will be saved in a ﬁle with the name RECORD/LINE IN with consecutive numbers

FILE_001.mp3, FILE_002.mp3, etc. If Err appears on the display during the recording, uit shows that
there has been an error. In this case, press the

button to stop recording.

9.-

: to start and stop playback.

10.-

RPT

: press this button to select one of the 4 following playback modes:

- Repeat deactivated (nothing appears on the information display).
- Repeat once (REP 1). to select the repetition of the audio track selected at that moment.
- Repeat all (REP ALL). to select the repetition of all the audio tracks on the SD card or the USB storage
device.
- Random order (REP). to select random playback of all the audio trackson the SD card or the USB
storage device

11.-

SD/USB

: to select the audio source from between an SD card or a USB storage device.

12.-

: on/off button for the USB/SD/MP3 recorder/player and for stopping playback. Hold this button

down for 3 seconds to switch the module on or off.

2.-

BLUETOOTH RECEIVER

: the Bluetooth receiver that is incoporated in the ampliﬁer will let you play and

control the playback of music received from a mobile telephone. To do this you will need to previously
link the telephone to the bluetooth receiver module.

1.- LED indicators to show that the mobile telephone is linked to the bluetooth receiver. If no device is

linked, the LED indicator on the right will ﬂash in blue. To link the device hold down the PAIR button
for a few seconds and the 2 LED indicators will ﬂash alternately. When the mobile telephone has been
linked, the LED indicator on the right will stay alight in blue.

2.-

: buttons for moving to the previous/following song in the playback list on the mobile telephone.

3.-

: to start and pause playback of songs from the mobile telephone.

- 5 -