EN
- 6 -
STEREO MODE (STEREO)
Move the switch on the back of the power amp to the STEREO position.
In this mode, the 2 channels will work independently. Connect the 2 inputs and the 2 speaker outputs. The
volume of the channels is adjusted separately.
BRIDGE MODE (BRIDGED)
Move the switch on the back of the power amplifier to the BRIDGED position.
In this mode, lthe input for the 2 channels will be the CH 1 channel input signal. The 2 channels in the power
amplifier are connected internally so that their power is joined in just one output. Connect the input from CH
1 channel and the BRIDGED speaker output. The volume is adjusted with the CH 1 control.
