CONNECTION AND OPERATING
- Make the connections with all the devices switched off.
- Connect the HDMI signal sources to the corresponding matrix inputs INPUT 1-4.
- Then connect the outputs OUTPUT to the TV monitors.
Outputs 1-3 are connected using the Cat 5e/6 extender. Output 4 is connected directly by HDMI. The
output 4 audio extraction function can be used (toslink connector) and the analogue audio converter (2 x
RCA connectors).
- In order to use the remote control, the remote control receiver provided should be connected in the IR EYE
connector located on the rear panel of the matrix.
- If you wish to control the matrix remotely, use the RS-232 or TCP/IP communication ports.
- Power the matrix using the mains adapter provided.
- 5 -
EN
FO-20M44XT_MANUAL_(EN_ES_FR_PT)_A5c_20200921-2020.qxp_Maquetación 1 21/9/20 11:19 Página 5
