MAXIMUM VOLUME AND INITIAL VOLUME
With the menu option of maximum volume (Max Vol) the maximum output volume can be limited. To access
this option press the menu button various times, with an external source selected (DVD, CD, AUX/PHONO),
and select the maximum volume value with the volume control.The Initial volume option (Init Vol) lets you
select the volume level for when the amplifier is turned on (if the volume when it is turned off is louder than
the initial volume). If the volume is lower than the initial volume when we turn it off, when it is turned on again
the last volume will be selected. The menu option of initial volume (Init Vol) is selected in the same way as
the maximum volume (Max Vol).
HEADPHONE OUTPUT
The headphone output allows you to listen in private, to avoid bothersome background noises. Before
connecting and wearing the earphones, lower the amplifier volume. Once connected and in place, raise the
volume to an appropriate level. Do not use them with the volume too high. Listening at too high a volume for
a long time can cause hearing loss.
TROUBLESHOOTING
RADIO TUNER
No stations are correctly tuned.
- Adjust the aerial.
- The aerial signal is weak. Connect an external aerial.
- The signal is affected by noise or interference.
REMOTE CONTROL
The remote control does not work.
- Another function has been selected. Select the required option.
- There are no batteries in the remote control.
- The batteries have run out. Replace them.
- The remote control is not being pointed at the sensor on the front panel or there is an obstacle between
the remote control and the sensor.
- The remote control is too far away from the amplifier.
GENERAL
There is no audio.
- Make sure the MUTE is deactivated.
- Check that the speaker output is selected.
- Check that the bridge between PRE OUT and AMP IN connectors on the back panel is in place.
- Check the power supply connection.
CLEANING
- Disconnect the system from the mains and clean the outside with a soft cloth.
- 13 -
EN
