________________________________________________________________________________
32
AST 14 C 255/00
4.4 PARAMETERS
The boards feature a memory with a series of parameters that can be accessed for
displaying purposes only. They can as well be edited for boiler perfect configuration
depending on the system used. These parameters can be directly accessed from user's
interface, or through the remote control. In the latter case, it is possible to access only up
to the 29th parameter.
TECHNICAL parameter editing
To access the parameter setting mode, press “reset” and “boiler status” keys
simultaneously for three seconds. Then use the “+/- heating” keys to select the desired
parameter (see list at the following paragraphs).
Press “OK” to confirm that parameter value has to be edited; the wrench symbol indicates
that parameter value can be edited using “+/- heating” keys:
Then confirm the modification of the parameter value by pressing the “ok” key again and
scroll the list to edit more parameters, or quit the setting with the “reset” key.
