________________________________________________________________________________
37
AST 14 C 257/00
4.4 PARAMETERS
The boards stores a series of parameters. You can access them merely to view them, or
you can modify them to achieve a better boiler configuration based on the system used.
These parameters can be accessed directly via the user interface, or the remote control. In
the latter case, you can only view/modify up to parameter 29.
Changing the TECHNICAL parameters
Press the reset and b oiler status buttons simultaneously for three seconds to enter
parameter programming mode. Then use the +/- heating buttons to select the required
parameter (see below).
Press OK to confirm that you wish to modify the value. The spanner symbol means the
parameter can be edited using +/- heating buttons.
Press OK-info to confirm the new value. Scroll through the sequence if you wish to modify
other parameters, or press reset to exit the programming mode.
