12
1.4.
Adjusting CH and DHW temperature
Press the DHW +/- button (a, fig.1) to select the desired domestic hot water temperature. During selection, DHW icon (7, fig. 1) will flash. As soon as
button is released, icon will continue flashing for approx. 3 seconds, and the DHW value will flash as well. After this time, value is stored and display
standard operation will be restored.
Press the CH +/- button (B, fig.1) to select the desired CH flow water temperature. During selection, HEATING icon (8, fig. 1) will flash. As soon as
button is released, icon will continue flashing for approx. 3 seconds, and the CH water value will flash as well. After this time, value is stored and
display standard operation will be restored.
At this stage, all buttons are enabled.
1. DHW TeMPeRATuRe SeLeCTIoN
2. CH TeMPeRATuRe SeLeCTIoN
1.5.
Parameter display
Press “Info” (d, fig.1) to scroll the different parameter values. You can quit this function at any time by simply pressing the "Reset" button (C, fig.1).
Table 2 describes the meaning of all displayable parameters.
