FOLSOM 2100DE, Installation And Operator'S Manual

Page: 34 / 62

Manual # 26-6092936-00 / Revision A VFC-2100DE
– Scaler with Digital Effects
27
Video Contrast / Brightness Adjustment
Pressing the ON/+ or OFF/- key while X VID CONT (Range: 0% to 125%) or X VID BRIGHT (Range: 100% to 125%)
is bracketed will allow the user to increment or decrement these values.
Technical Support Menu
Pressing the ON/+ key while the TECH. SUPPORT field is bracketed will display the following menu.
Video Messages
The following menus are displayed when an error is encountered with recognizing or detecting video, or there is an
error with the VFC-2100DE unit.
Video Error
This message is displayed if the VFC-2100DE could not detect a valid video source on either input. The message will
modify itself to list only one input not being detected if such an event occurs. If
GL appears in the list, then Genlock is
enabled (see section 6.3.2.4) and there is no source available on the EXT VIDEO INPUT connector (see Figure 5-1).
This same message will appear if there is video but the VFC-2100DE does not recognize the format. This message
box can be disabled within the Autosync menu (see section 6.5.3).
If you encounter this message, you should verify the connection between the VFC-2100DE and the input source.
Pressing any key will bypass this message and bring the user to the Main menu.
Internal Error #2
This menu displays when a file in the flash memory component has become corrupted. If the message persists after
cycling the power on the VFC-2100DE unit, call FRI support and provide the FLASH ID number shown.
HUD MIXER CNTRL
X VID CONT <###%>
X VID BRIGHT <###%>
FRI TECH. SUPPORT
(888) 414-7226
EM.(916)802-6867
VER ###.##.#
NO SYNC DETECTED
ON INPUT A, B
ERROR
INTERNAL ERROR #2
FLASH ID: ##
CALL TECH. SUPPORT
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com