Cleaning and sanitizing beverage system before use
Cleaning
Prepare 6 gallons (23 liters) of cleaning Solution A. Fill a clean product tank with cleaning solution. Fill a
second clean product tank with potable rinse water.
1.
Disconnect all syrup lines from product containers.
2.
Connect syrup circuit #1 to cleaning solution tank, pressurize tank to 20-50 psi, and dispense 1/2
gallon (2 liters) of solution into a suitable container from valve #1.
3.
Connect syrup circuit #1 to rinse tank, pressurize tank to 20-50 psi, and dispense 3 gallons (11 liters)
into a suitable container from valve #1.
4.
Repeat this cleaning and rinsing for all syrup lines.
5.
Remove diffusers and nozzles from valves, soak in cleaning solution, rinse well and reinstall.
Sanitizing
Prepare 6 gallons (23 liters) of sanitizing Solution B. Fill a clean product tank with this solution.
1.
Connect one tank to syrup circuit #1. Dispense 1/2 gallon (2 liters) from valve #1.
2.
Repeat for all remaining circuits, allowing sanitizing solution to remain in all circuit lines for 15
minutes.
3.
Connect a clean, empty tank (pressurized to 50 psi) to each syrup circuit and blow out sanitizer by
operating each valve.
4.
Remove diffusers and nozzles from valves, soak in sanitizing solution for 15 minutes, rinse well and
reinstall.
5.
Reconnect all lines and dispense product through valves to purge any remaining sanitizer.
Periodic cleaning of dispenser
Recommended daily cleaning of drain pan
1. Remove all debris from drain pan.
2. Pour 1 gallon (4 liters) hot water into drain pan to keep drain lines clear.
Recommended weekly cleaning
1. Remove drain pan and grill and wash with Solution A. Rinse thoroughly.
2. Remove nozzles and diffusers from valves, soak for at least 10 minutes in cleaning Solution A, rinse, sanitize
with Solution B and reinstall.
3. Pour a solution of one cup (8oz/237ml) household bleach mixed with one gallon (3.8 liters) hot water into drain
pan to help prevent algae growth in drain lines.
9
Failure to remove all sanitizer may result in health hazard.
!
DO NOT run plastic parts (drain pan, dispense chute cover,
dispense wheel) through a dishwasher.
!
Summary of Contents for U155 U155X
Page 23: ......
