Recommended cleaning intervals*
Symphony Plus
Frequency
Drain Line
weekly
Drain Pan/Drip Pan
weekly
Exterior
as needed
Condenser
monthly (air-cooled only)
Dispenser and Components
semi-annually
Ice Machine
semi-annually
Transport Tube
semi-annually
Ice Storage Area/Bin
semi-annually
* Ice machine and dispenser must be cleaned prior to start-up.
Weekly
CAUTION!
§
Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the dispenser.
Dispenser drain pan and drain line
§
Pour 1 gal. (3.8 L) of hot tap water into drain pan to flush drains.
Splash panel front, SensorSAFE™ infrared dispensing
1. Deactivate dispensing by pressing and releasing clean switch located on left side of unit under top front
cover.
2. Clean lens and splash panel front using a soft cloth and mild, non-abrasive, non-chlorine based cleaner.
3. Reactivate dispensing by pressing and releasing clean switch again.
Monthly
CAUTION!
§
Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the dispenser.
Condenser (air-cooled ice machine only)
§
Use a vacuum cleaner or stiff brush to carefully clean condenser coils of lint and debris to ensure optimal
performance.
Semi-Annually (more often if conditions dictate)
§
A cleaning procedure should always include both the ice machine and dispenser.
§
Icemaking system can be cleaned in place.
CAUTION!
§
Wear rubber gloves and safety goggles (or face shield) when handling SafeCLEAN Plus.
§
Use only Follett approved cleaners.
§
Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the dispenser.
E12CI414A R290, 230 V 50 Hz 7
