6
Maestro Plus
Vision • RIDE Technology
3.
Dispenser Preparation
3.1
Install Vision dispenser
Refer to Vision Installation, Operation and Service Manual packaged with dispenser for detailed instructions.
3.2
Install bin signal
➊
➋
Ground
Relay in electrical box converts
24 V to contact closure
1. Mount the electrical box to the side of the Vision dispenser
➊
to establish a ground connection.
Note: If a 2 x 4 box is mounted to a non-grounded surface, connect ground wire at an appropriate
ground.
2. Connect the bin signal plug on the electrical box to the bin signal cord on the bin
➋
3. Final connection will be made after ice machine has been installed.
