Remote 1810, 2110 series ice machine
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
8180‑202205 | © Follett Products, LLC
Ice production – Horizon Elite 1810 series
Inlet water
temperature
F (C)
Ambient air temperature F (C)
60 (16)
70 (21)
80 (27)
90 (32)
100 (38)
lb (kg) pr
oduction in 24 hr
50 F (10 C)
1859 (844)
1784 (810)
1685 (765)
1616 (734)
1500 (681)
60 F (16 C)
1723 (782)
1684 (765)
1578 (716)
1563 (710)
1409 (640)
70 F (21 C)
1620 (735)
1594 (724)
1514 (687)
1420 (645)
1319 (599)
80 F (27 C)
1550 (704)
1487 (675)
1485 (674)
1351 (613)
1299 (590)
90 F (32 C)
1471 (668)
1435 (651)
1370 (622)
1285 (583)
1207 (548)
Ice production – Horizon Elite 2110 series
Inlet water
temperature
F (C)
Ambient air temperature F (C)
60 (16)
70 (21)
80 (27)
90 (32)
100 (38)
lb (kg) pr
oduction in 24 hr
50 F (10 C)
2039 (925)
2039 (925)
1934 (877)
1825 (828)
1703 (772)
60 F (16 C)
1943 (881)
1888 (856)
1878 (852)
1710 (776)
1584 (718)
70 F (21 C)
1833 (831)
1781 (808)
1789 (811)
1634 (741)
1489 (675)
80 F (27 C)
1754 (796)
1686 (765)
1643 (745)
1535 (696)
1426 (647)
90 F (32 C)
1650 (748)
1603 (727)
1577 (715)
1457 (661)
1395 (633)
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency.
Agion is a registered trademark of Sciessent LLC.
HORIZON ELITE, ICE•DEVICE, ICE MANAGER, MICRO CHEWBLET, SAFECLEAN PLUS, SANISPONGE, SYMPHONY PLUS and VISION are trademarks of Follett Products, LLC.
CHEWBLET, FOLLETT and RIDE are registered trademarks of Follett Products, LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
Remote condensing unit
Condensing unit installation specifications
Important specifier notes
air in
exhaust
48.00"
(121.9cm)
48.00"
(121.9cm)
24.00"
(61.0cm)
24.00"
(61.0cm)
36.00" (91.4 cm)
height clearance
1. Provide front, back, top and side clearances
as shown.
2. The maximum refrigerant line run length
is 75' (22.9 m). Installations require 14.5 lb
of refrigerant.
3. The maximum line rise above the
evaporator is 35' (10.7 m). Condensing
unit above evaporator unit – 35' (10.7 m)
(installations with rise over 20' (6.1 m)
require additional suction line s‑trap at
midpoint rise).
4. The evaporator can only be mounted
a maximum of 15' (4.6 m) above the
condensing unit.
Note: The service loop is not included
when calculating length, rise or drop in the
tubing run.
Note: To connect evaporator/ice machine to rack systems, see page 3.
