background image

6

 

Form# 8180

Remote 1810, 2110 series ice machine

3 – Horizon Elite ice machine mounting accessories

Optional wall mount bracket

Optional machine stand

Important specifier notes

22.00"

(55.9 cm)

25.50"

(64.8 cm)

23.00"

(58.4 cm)

A

C

D

B

6.88"

(17.5 cm)

A

 - 15.875" (40.3 cm) 

B

 - 19.375" (49.2 cm)

C

 - 13.00" (33.0 cm) 

D

 - 21.00" (53.3 cm)

1.  For secure wall mounting, specify 

optional wall mount bracket. 

2.  Wall and fasteners must support the 

weight of the ice machine, bracket, 

supply water and ice. Use of a backing 

board may be required with hollow wall 

construction.

3.  Machine stand mounting adds 6.88" 

(17.5 cm) to height of ice machine.

4.  No dips in tube routing allowed.
5.  Ice transport tube needs minimum 1/4" 

per foot (2 cm per meter) pitch toward 

ice machine and should be secured to 

prevent dips and traps from forming.

2 – Undercounter/in-cabinet mounting

Cabinet details

Important specifier notes

Cabinet base

must be flat and free of obstructions

(no lip or utilities to block removal)

Cabinet door opening

 

24.00"W x 23.5"H

(60.9 cm x 59.7 cm) minimum

slides

out

Ice transport tube

secure to prevent dips

and traps from forming

12.00" (30.5 cm) minimum

between ice machine

and dispenser

minimum 1/4" per foot

(2 cm per meter)

pitch toward ice machine

1.  Cabinet door opening 

must meet minimum size 

requirements shown and be 

free of obstructions to allow ice 

machine to slide out (no lip or 

utilities to block removal).

2.  Cabinet base must be capable 

of supporting ice machine and 

allow ice machine to rest flat on 

cabinet bottom.

3.  No counter supports, electric 

or plumbing can run in front of 

the ice machine.

Summary of Contents for Horizon Elite 1810 Series









Reviews: