1
FOLGER ADAM SECURITY INC.
A member of the Yale Security Group
200 Strike
200 Series Parts
Non Fail Safe
Fail Safe
Maintenance and Lubrication
Under normal usage the 200 strike should be cleaned and lubricated once a year to maintain its reliability. In applications with high
usage or dirty conditions more frequent service may be necessary. Lubrication points are identified in the illustration. When servicing
the 220, inspect the internal parts for excess wear or breakage and lightly lubricate per instructions below. Lubricate with lightning
grease available from Folger Adam. Never lubricate any strike with oil! Such lubrication collects dirt and forms an abrasive and sticky
compound that may affect the function of the strike.
1. Remove the strike from the face plate (held on by (4) 8-32, 1/4 FHPMS). Remove the strike frame from the strike.
2. Remove the top cover (held on by (2) 6-32 x 3/8 FHPMS).
3. Remove the solenoid from the strike case.
4. Remove the solenoid slide carrier from the case.
5. Check and remove any old excess lubricant in the case and the slide carrier.
6. Lightly lubricate the area in the case where the slide carrier surface rests.
7. Reinstall the slide carrier into the case.
8. Check the solenoid and plunger for excess wear, dirt, grime, or oil.
9. Reinstall the solenoid assembly to the case.
10. Reinstall the top cover, keeper guard and face plate.
TO INSPECT AND LUBRICATE THE STRIKE
Lightning grease under
carrier slide before assembly
Solenoid
Carrier Plate
Note: Non-Fail position shown for
Fail Safe operation reverse
position of solenoid 180
degrees and reinstall onto
the carrier plate.
Maintenance and Lubrication Instructions
Summary of Contents for 200 Strike
Page 1: ......
