3.3 Unfolding Procedure
This operation must always be done according to the security instruction (chapter 3.1)
3.3.1 Fold out the winch handle
3.3.2 Detach the wall secure chain from its wall bracket.
3.3.3 Open the nose wheel brake.
3.3.4 Loosen the winching system by turning the winch handle contra clockwise several times.
3.3.5 Pull carefully out the drawbar off the wall approx. 1 yard, and make sure that the winch wire allows the drawbar to be pulled
out. Pay attention to prevent the trailer not to fall over. Keep children and pets away!
3.3.6 Continue unfolding the trailer by turning the winch handle contra clockwise. Make sure that the nose wheel rotation has an
adequate direction and no obstacles to roll.
3.3.7 When the trailer is fully folded out, latch the drawbar to the frame by tightening the two eye nuts by hand (ref. 3.2.4) Use the
L-wrench or similar to enforce the eye nuts to be fastened. Avoid using much force. Tighten the winch wire slightly before
driving, the wire resting onto the bolt tube of the locking device front end.
3.3.8 Elevate the side walls from folded position, and attach the rear and front walls onto their respective hinges. Tighten the wall
latches.
3.3.9 Turn the nose wheel into parking position or driving position if immediate driving use.
- 23 -
Owner´s Manual - FT 752, rev 02
2019 © Foldtrailer Ltd.