05
3-3. Adjusting The Footrest Angle
ADJUSTMENT
3-5-1. Manual Brakes
Note:
Brakes adjustment are based upon the diameter and type of the wheels. After repairing a flat tyre or
in the event of wear of the pneumatic or solid tyre, you may need to adjust the brake(s).
- After release the screws the footplate angle can be adjusted using the different
hole at 3 range incline angle.(P14
&
15)
- Retighten the screws.(P16)
3-4. Adjusting The Backrest Height
3-5. Wheel Lock
-
Remove the backrest padded and end cap.
(
P17
&
18
)
-
After opening the both screws (left & right ),the backrest height can be
adjusted.
(
P19~20
)
-
Retighten the screws.
The manual brakes are designed to secure the wheelchair during long stops.
They are not intended to slow down the wheelchair or to be used as support
during a transfer. They must be operated simultaneously. In order to brake,
The handle (A) push inward to release the brake (P21). The handle pull outward
to lock the brake (P22). Once the brakes are engaged, the wheelchair should
not move at all.
P14
P15
P16
P17
P18
P19
P20
P21
P22
A