background image

Q: The cover is twisted

 and I don't know what to do….   

A: 

The safety mechanism unlocked on one side to protect spa and lift from permanent damage. 

Push the upper carbon arm down by overcoming the unlock force to level the cover and simply 

close the spa with the smart key.  

________________________________________________________________________ 

Q: 

In the full open position my dog jumped on the cover and the cover moved down.  

The cover is symmetric

 

down

 and I don't know what to do….   

A: 

The safety mechanism unlocked on both sides to protect spa and lift from permanent damage. 

Simply close the spa and the control will automatically align the lift system.  

________________________________________________________________________ 

Q: 

My spa cover 

lift is working in closing direction only.

 I cannot open the spa.  

A: 

The position counter data is corrupt. Simply initiate a manual alignment with the Smart key to 

solve this problem. see QR card on page 28, alignment required section 

________________________________________________________________________ 

Q: 

My foldaway 

lifts the mid section of the cover before the front cover raises

.  

A: 

The front cover sticks to the spa shell e.g. after a longer period of not using the spa or in cold 

environment when moisture between the cover and the spa freezes. Stop the lift and pull the front 

cover on the handle gently upwards in order to detach the cover from the spa surface manually.  

18

Summary of Contents for F1-230 V10






















Reviews: