FOG 442 9020, Manual

Page: 27 / 72

444 9160 / 444 9180 / 442 9020
27
E 219 GB - Issue 1
Mounting of the lifting arms:
When mounting the lifting arms, please observe the travel direction.
1- Locking device of lifting arms
(without protective cap)
2- Carrying bolt
3- Lifting arm
4- Circlip
Lubricate the carrying bolt and insert smoothly into
the lifting arm.
Insert the lifting arm into the holder of the lift
carriage.
Press the carrying bolt upwards and mount the
safety ring 45x1,75 DIN 472 into the drill hole of the
lifting arm from below.
Plug the locking device of the lifting arm into the
carrying bolt. In doing so, the teeth of the locking
device oft the lifting arm must slot into the lift
carriage holder. Lock into place the edge of the
covering cap for the locking device of the lifting arms
into the groove at the internal toothing ring.
Mount the remaining 3 lifting arms in the same way.