FODSPORTS BT-S2Pro, User Manual

Page: 9 / 88

Before using this device, Please charge the headset with USB charging
cable. Please ensure that the battery is fully recharged when you first time
use it.
We have provided you with the ability to charge the system via the USB
I
port of your computer.
•·
The charging cable has a small USB plug for the headset and the large USB
plug for the computer or AC adapter; please observe to correct orientation
of the USB plug and socket before inserting
(1) Insert the USB plug of the charging cable, into the USB small jack of the
headset; you can either charging by computer or AC adapter.
(2) While charging, the red LED on the headset module will illuminate,
when the charging is finished, the red LED will extinguish. A normal charge
from a low battery will take about 4 hours.
Note: if you do not use the headset for a month or more, to protect
the Poly-Li battery, please charge the headset at least every month.
(The fault damaged by wrong charging will be not guaranteed).
Turning the Unit on into Standby Mode
Press and hold the power/intercom button at the end of the unit. After 3
sec you will hear a "Di" and the blue LED will begin to flash. Let go of the
button and the unit is now in standby mode.
Turning off the Unit
Press the power /intercom button for 5 seconds until you hear a "Di" tone
and the lights extinguish.
Note:When turn off the unit, please don't loosen the power
/intercom button when hear "dudu"tone. If so, the Bluetooth
memory will be cleared away.
7