FODSPORTS BT-S2Pro, User Manual

Page: 7 / 88

2.
Now
you need to attach the speaker and microphone arm to the inside
of the helmet. Take the Velcro pad which the speaker will attach to, and
test for the best position to fix it. The Velcro Pad should be fixed at the
height of your ear in the helmets ear pocket. You will need to put the
I
helmet on a few times to find the optimum position to apply the pad.
..
When the correct positioning is found, remove the protective strip and
apply the Velcro Pad.
3. Next, take the Ear Speaker and attach it to the Velcro Pad. Run the
Microphone Arm down along down to where your mouth will be. As the
Microphone Arm is flexible, you can adjust it so it sits in the optimum
position in front of your mouth. Some helmets have removable padding; if
yours does, it is recommended to run the speaker and microphone under
the padding.
4. Taking care to match the pins up, connect the Headset Plug to the
Headset Socket. The plug can only be inserted in one position.
5. Secure the cord of the Headset Plug inside the helmet. Tuck any extra
wire into the helmet. Ensure that only few centimeters of the cord comes
out. You have successfully mounted the Inter Phone
Note: Another choice for mounting the Inter Phone
You can directly use the Velcro(with 3M) to mount the lnterphone on the
edge of helmet. See the following pictures.
5